Subaru Navigation System Owner's Manual page 238

VOICE RECOGNITION SYSTEM OPERATION
To cancel voice recognition, select
or press and hold the talk switch.
With navigation function:
To use the voice recognition system for navigation
function, say the command to change to the
This function is available when "Voice Language
Voice recognition can be set on the "Voice
Recognition (Voice
NOTE
not disappear, press the talk switch and try again.
Selecting (Voice Settings) can be displayed
Voice Settings
"Voice Recognition Prompts (Voice Recognition Prompts)" can
be set on the "Voice Settings (Voice Settings)" screen.
Some voice guidance can be canceled by setting voice
prompts to off. Use this setting when it is desirable to say a
command immediately after pressing the talk switch and
hearing a beep.
Turn the "POWER/VOLUME" knob, or use the volume control
switch on the steering wheel to adjust the speech guidance
volume.
236
(Cancel),
Cancel
Recognition)" screen.
VOICE COMMAND EXAMPLE: SEARCH FOR A
SONG
1.
Press the talk switch.
2.
Say "Play song <name>".
the recognition result, and the system starts playing
music.
If multiple matching items are found, a selection
screen will be displayed. Say "<number>" or select
the number. The system then starts playing music.
NOTE
The Gracenote database is only compatible with the SD*, USB
or iPod mode.
*: With navigation function
An SD card*, USB memory or iPod must be connected to enable
*: With navigation function
When an SD card*, USB memory or iPod is connected,
recognition data is created so tracks can be searched using
voice commands.
*: With navigation function
Recognition data is updated under the following conditions:
When the SD card*, USB memory or iPod data has changed.
*: With navigation function