Subaru Navigation System Owner's Manual page 7

Be careful of the volume when turning on the power. If a loud
noise is emitted suddenly when you turn on the power, it may
damage your hearing.
Do not apply a strong force to the display. Doing so may result
in a malfunction.
memory card slot. Doing so may result in an injury.
Do not touch the hot parts of the unit. The hot parts may burn
you.
Do not use while there is an abnormality such as sound
Using the unit during extremely high or low temperature may
result in mistaken operation or a malfunction. In particular, the
temperature inside the vehicle can often rise to a high level
during the summer. Cool the vehicle, for example by opening
a window, before using the unit.
Be careful if metal or water enters the unit, or the unit is
exposed to a strong impact, because it may result in a
malfunction.
The touch buttons on the display screen may not operate
correctly if condensation forms inside them. If this happens,
do not attempt to operate the switches until the condensation
has disappeared.
If juice or similar liquid is spilled on the display, wipe
off immediately. Failure to do so may result in product
malfunction.
attracts dust, and should therefore be cleaned occasionally.
When cleaning, turn off the power, and wipe lightly with a soft,
dry cloth. To remove dirt, soak a soft cloth in neutral detergent
organic solvents (benzene, ethanol, thinner, etc.), acids, or
alkalis. Using such agents will result in screen deterioration.
Furthermore, do not hit the screen or rub it with hard objects.
NOTE
Fuji Heavy Industries is not responsible for any damages to the
purchaser or third parties that occur from using the map data.
We do not provide any replacements or refunds for any mistakes
there may be in the map data displays or contents, such as
misspelling, omissions or misaligned positions.
Fuji Heavy Industries makes no guarantee that the functions
objectives of the purchaser.
Functions that cannot be operated while driving have their colors
toned down when the vehicle is being driven, and their operation
is disabled. Touching a disabled switch may result in the display
of an operation prohibited message on the screen.
During strong vibrations, such as when driving on a poor road
surface, the unit may no longer be able to read the data from the
disc or "SD memory card", and it will not operate correctly. When
the vibration lessens, normal operation will return after a short
time.
INTRODUCTION
5