Subaru Navigation System Owner's Manual page 5

NOTE
Useful information for the user is described.
Be sure to read all materials such as manuals and warranties
that come with the product. Fuji Heavy Industries is not
responsible for problems that arise due to failure to follow these
instructions.
between the content of the manual and the features of the unit.
SYMBOLS USED IN ILLUSTRATIONS
Safety symbol
The symbol of a circle with a slash through it means
"Do not", "Do not do this" or "Do not let this happen".
Arrows indicating operations
PRECAUTIONS FOR USE
Indicates the action
(pushing, turning,
etc.) used to operate
switches and other
devices.
WARNING
The main unit requires a 12 V DC power supply. The main unit
should not be installed in any vehicle which does not have a
12 V power system with a ground-connected negative side.
An installation other than the one intended may cause severe
damage to the main unit, and electric shock or serious injury
to the users.
Even when using the route guidance of the navigation
regulations. If you drive by following only the route guidance
To ensure safety, the driver should not operate the navigation
system while driving. Operating the navigation system while
driving may result in an accidental steering wheel operation
or otherwise cause an accident. Stop the vehicle before
operating the navigation system. Also, do not watch the
screen while driving because doing so is dangerous (ETC).
Inattention to road conditions ahead may result in an accident.
The driver should not perform operations such as volume
adjustment while driving. Inattention to road conditions ahead
may result in an accident, so be sure to stop the vehicle in a
safe place before performing the operation.
INTRODUCTION
3