Subaru Navigation System Owner's Manual page 173

2.
Select the device to be connected.
: Phone
: Audio device
: Smartphone Application
devices will illuminate.
Dimmed icons can be selected to connect to the
phone/audio function directly.
If the desired Bluetooth device is not on the list, select
Add
3.
Select the desired connection.
When another Bluetooth device is connected
To disconnect the Bluetooth device, select
(Yes).
4.
connection is complete.
If an error message is displayed, follow the guidance
on the screen to try again.
NOTE
It may take time if the device connection is carried out during
Bluetooth audio playback.
Depending on the type of Bluetooth device being connected, it
may be necessary to perform additional steps on the device.
AUTO CONNECTION MODE
To turn auto connection mode on, set "Bluetooth Power
device in a location where the connection can be
established.
When the ignition switch is in the "ACC" or "ON"
position, the system searches for a nearby registered
device.
The system will connect with the registered device
that was last connected, if it is nearby.
CONNECTING MANUALLY
Yes
When the auto connection has failed or "Bluetooth Power
(Bluetooth Power)" is turned off, it is necessary to connect
Bluetooth manually.
1.
Select
(SETTINGS).
Bluetooth ® SETTINGS
and then select
SETTINGS
7
171