Download Print this page

Care And Maintenance; Fault Instructions - Kärcher NT 361 Eco Instruction

Hide thumbs

Advertisement

English
Connect the junction box to the
electric tool

CARE AND MAINTENANCE

♦ Always pull out the mains plug
when working on the suction
machine.
NT 361 Eco / NT 361 Eco TE / NT 561 Eco / NT 561 Eco TE
Cleaning/changing the surface
filter
Open the filter cover (1) and take
out the surface filter (2).
Cleaning / changing the surface
filter
Close the filter cover, it must lock
audibly
Changing the output air filter
Open the filter cover (1) and
exchange the exhaust air filter (2).
Clean electrodes
Unlock and remove the suction
head
Clean electrodes
Replace the suction head and lock
it in place

FAULT INSTRUCTIONS

The suction turbine does not run
• Check the cable, plug, fuse and
socket.
• Switch on the machine.
The suction turbine switches off
• Empty the container.
Suction force diminishes
• Remove clogging material from
the suction nozzle, suction pipe,
Power Filter Clean, suction hose,
or surface filter.
• Activate the remote control for
Power Filter Clean on the handle.
• Change the paper filter bag.
• Lock the filter cover in place.
• Cleaning/changing the surface
filter.
Dust ejects when sucking
• Check the surface filter is
positioned correctly.
• Change the surface filter.
Automatic switch-off (wet
suction) is defective
• Clean electrodes.
• Constantly check the filling level
for an electrical non-conductive
liquid.
Power Filter Clean switches
regularly
• Loosen suction nozzle or end of
hose when caught on vacuumed
object.
• End continuous suction from the
liquid container.
• Remove clogging material from
the suction nozzle, suction pipe,
Power Filter Clean, suction hose,
or surface filter.
• Change the surface filter.
9

Advertisement

loading

  Also See for Kärcher NT 361 Eco

This manual is also suitable for:

Nt 561 ecoNt 561 eco teNt 361 eco te