Tension Release Mechanism (1) - Brother HE-800A Service Manual

2-17. Tension release mechanism (1)

4136Q
4138Q
1. Loosen the set screw (1).
2. Remove the tension stud bracket assembly (2) and the tension release pin (3).
3. Remove the shoulder screw (4).
4. Remove the two screws (5), and then remove the tension release solenoid assembly (6).
5. Remove the shoulder screw (7), and then remove the tension release link (8).
6. Remove the bolt (9) and plain washer (10), and then remove the plate (11), plunger (12) and spring (13).
7. Remove the plunger pin (14), and then remove the plunger (12), tension release rubber assembly (15) and the
tension release solenoid link (16).
8. Remove the two screws (17), and then remove the tension release solenoid (18) from the solenoid holder (19).
HE-800A
2. DISASSEMBLY
4137Q
4139Q
39