Brother HE-800A Service Manual page 35

4093Q
4094Q
9. Remove the two shoulder screws (25) and the washer (26), and then remove the thread trimmer lever set (5)
from the upper thread trimmer fulcrum shaft (27).
10.Remove the roller (28).
11.Remove the two screws (29) and plain washers (30), and then remove the setting plate (31) from the upper
thread trimmer lever assembly (32)
12.Remove the nut (33) and the plain washer (34), and then remove the support shaft (35) from the setting plate
(31).
13.Remove the two collars (36) and the screws (37), and then remove the back plate (38) and the stop plate (39)
from the upper thread trimmer lever assembly (32).
14.Remove the spring (40).
15.Remove the screw (41), and then remove the spring hook plate (42) from the upper thread trimmer lever
assembly (32).
16.Remove the rubber cap (43).
17.Loosen the two set screws (45) of the set screw collar assembly (44), and then remove the upper thread
trimmer fulcrum shaft (27).
HE-800A
2. DISASSEMBLY
4095Q
27