G11 - McQuay MWM Service Manual

MCQUAY Service Guide Book

4.3 G11

Operation Guide
1. "ON/OFF" Button
2. Temperature Setting
•
The temperature setting range is from
16°C to 30°C.
•
Press both buttons simultaneously to
toggle and from ▲ °C to▼ °F setting.
3. Operation Mode
•
Cooling only unit: COOL ( ), DRY ( )
and FAN (
•
Heat pump unit: AUTO, COOL ( ), DRY
( ), FAN (
4. Fan speed selection
•
Press the button continuously will toggle
the fan speed in the following order: Low
( ) –––: Med (
–––: Auto
5. ON Timer Setting
6. OFF Timer Setting
7. Automatic Air Swing
•
Press the SWING (
the automatic air swing function. Press
again to stop the louver at the desired
direction.
).
) and HEAT ( ).
) –––: High (
) button to activate
8. Sleep Mode Setting
•
This function is available under COOL,
HEAT and AUTO mode.
•
When the unit is operating under cooling
mode, the set temperature is increased
by 0.5°C after 30 minutes, 1°C after an
hour, and 2°C after 2 hours.
•
When the unit is operating under heating
mode, the set temperature is decreased
by 1°C after 30 minutes, 2°C after an
hour and 3°C after 2 hours.
9. Clock Time Setting
•
Press + button to increase the clock time.
•
Press – button to decrease the clock
time.
10. Turbo Mode
•
Press the TURBO (
the required set temperature in a short
time.
11. Ionizer
•
Press the Ionizer (
the negative Ion function, which will
refresh the indoor air effectively.
12. Personalize Setting
•
Press
initiate personalized setting
•
Set the individual setting e.g. MODE,
SET TEMP or FAN SPEED and leave for
4s to save the setting into the program.
•
2 groups of settings are allowed to store
in the handset. Press once to activate the
P1 setting, press again to cycle between
P1 and P2.
•
Press
personalize setting.
)
8
Handset Operating Guide
) button to achieve
) button to activate
button and hold for 3s to
any key to deactivate the