McQuay MWM Service Manual page 14

MCQUAY Service Guide Book
•
The flap (horizontal blade) will begin to
swing.
•
To set the flap at desired position, press
button when the flap has reached
the desired position. The flap will stop
moving. The symbol
the LCD.
10. COMFORT AIRFLOW Operation
•
When COMFORT is enable, the flow of air
will be upward direction while in COOL
operation and in the downward direction
while in HEAT operation, which will
provide a comfortable wind that will not
come in direct contact with people.
•
To start COMFORT AIRFLOW operation,
press COMFORT
change, preventing air from blowing
directly on the occupants of the room. The
symbol is displayed on the LCD.
•
Air flow rate is set to AUTO. COOL/ DRY:
The flap will go up. HEAT: The flap will
go down.
•
To cancel
operation, press COMFORT
again. The
memorized
COMFORT AIRFLOW operation.
•
The symbol
LCD.
11. ON TIMER Operation
•
To use ON TIMER operation, press
button.
•
is displayed on the LCD. Each
pressing of
setting by 1 hour. The timer can be set
between 1 to 12 hours.
•
To cancel ON TIMER operation, press
button.
LCD.
12. OFF TIMER Operation
•
To use OFF TIMER operation, press
button.
•
is displayed on the LCD. Each
pressing of
by 1 hour. The timer can be set between 1
to 9 hours.
disappeared from
button. The flap will
COMFORT AIRFLOW
button
flap will return to
position before
will disappear from the
advances the time
will disappear from the
advances the time setting
•
To cancel OFF TIMER operation, press
LCD.
13. CANCEL Button
the
the
13
Handset Operating Guide
button. will disappear from the