Sound Settings - Skoda Infotainment Radio Swing Operating Instructions Manual

■ Time and date - Time and date settings
Language - Set the device language
■
Keypad: - Keypad display for text entry
■
■ Additional keypad languages- setting of available keyboard languages in the
input screens » page 14
Units - Unit settings » page 14
■
■ Remove SD card safely - Safe removal of the SD storage card
Remove USB safely - safe removal of USB or iPod device
■
Factory settings - Restore to factory settings
■
■ Bluetooth - Settings for the Bluetooth
System information - Displays system information
■
Copyright - Information on licences and copyrights are only available in Eng-
■
lish

Sound settings

Fig. 8 Sound settings / volume ratio
›
Press the button or the button

Volume - Volume settings
■
■ Max. switch-on volume - Sets the maximum volume after switching on
Announcements - sets the volume for the traffic program alerts (TP)
■
Volume adjustment. (SDVA) - Speed-dependent volume adaptation
■
■ Entertain Lower - lowering the volume of the speaker (audio)
1) The correct display of country-specific characters (e.g. ID3 tag information) can not always be guaran-
teed.
2) If after 10 seconds, the screen is not activated after touching the screen or by pressing or turning the
menu button » Fig. 1 on page 5, the screen is black.
2
» page 13
1)
» page 14
» page 14
®
function » page 14
» page 15
→ Sound.

» page 38
■ AUX volume: - Setting for the volume of the device connected through AUX
Quiet - Low volume
■
Medium - Medium volume
■
■ Loud - High volume
BT audio - Setting for the volume of the connected Bluetooth
■
Quiet - Low volume
■
■ Medium - Medium volume
Loud - High volume
■
iPod - Setting for the volume for the connected iPod
■
■ Quiet - Low volume
Medium - Medium volume
■
Loud - High volume
■
Balance - Fader - Sets the balance between left and right, front and
■
rear » Fig. 8
Bass - Mid. - Treble - Setting for the bass, mid and treble
■
Confirmation tone - Switch on/off confirmation tone when a function key is
■
pressed
Screen settings
›
Press the button → Screen.

Screen off (in 10 s) - Activate/deactivate energy-saving mode for the display
■
Brightness - Adjusts the brightness of the screen
■
Brightest - brightest level
■
■ Brighter - brighter level
Medium - medium level
■
Darker - darker level
■
■ Darkest - darkest level
Confirmation tone - Switch on/off confirmation tone when a function key is
■
pressed
■ Show clock in stdby mode - Time and date displayed on the screen when the
ignition is switched on and the unit is switched off
Time and date settings
›
Press → Time and date.

®
device
» Fig. 8
2)

13
Unit settings