Telephone Functions; Delete The Telephone From The List Of Paired Devices; Disconnection - Skoda Infotainment Radio Swing Operating Instructions Manual

After confirming the connection is made to the selected device. Only the newly
selected profile will be replaced the other profiles remain connected to the
original device.
Fast switching of the HFP connection
By pressing the function key
B

displayed.
After pressing the function key with the name of the paired device, the mes-
sage in device screen ... Replace this connection with ... ? appears along with
the following function keys.
›
Replace - replace the connection by the selected paired device (when availa-
ble)
›
Cancel - Cancel the replacement connection
After confirming the connection is made to the selected device via the HFP
profile. The connection via the audio profile remains unchanged.

Disconnection

Press in the menu the Telephone function key  → Bluetooth → Paired devi-
ces.
A list of paired devices is displayed.
By pressing the green icon for the profile, the message in the device screen ...
Disconnect the profile - are you sure? is displayed along with the following
function keys.
›
Disconnect - Disconnect connection
›
Cancel - Cancel the disconnection

Delete the telephone from the list of paired devices


Read and observe on page 29 first.
›
Press in the menu the Telephone function key  → Bluetooth → Paired de-
vices.
A list of paired devices and the following function keys are displayed.
›
 All - Delete all the telephones in the list of paired devices
›
 - Delete the desired telephone
After selecting one of the function keys, the function keys are displayed.
›
Delete - delete confirmation
›
Cancel - Cancels the deletion
32
Telephone
» Fig. 16 on page 27 a list of paired devices is
Disconnection

Read and observe on page 29 first.
The connection of a telephone to the device can be disconnected in one of the
following ways.
›
By removing the ignition key (or turning off the ignition and opening the driv-
er's door in the case of vehicles with the starter button).
›
®
By switching off the Bluetooth
settings.
›
®
By switching off the Bluetooth
›
By the separation of the connection in the telephone.
›
By removing the telephone from the list of paired devices
the telephone from the list of paired devices.
›
®
By turning off the Bluetooth HFP profile
profile .
›
By turning off the connected phone.
›
By the moving of the phone outside the Bluetooth
If a telephone is connected to the device and the device is turned off, the con-
nection to the telephone is not lost. The connection is only lost after switching
off the ignition (for vehicles with the starter button after switching off the ig-
nition and opening the driver's door).

Telephone functions


Introduction
This chapter contains information on the following subjects:
Speed dialling a phone number
Directly enter a telephone number
List of telephone contacts
Call lists
Telephone conversation
First and foremost, pay attention to the safety instructions
Speed dialling a phone number
By pressing a function key for speed dialling
diate choice of pre-assigned phone number is possible.
function on the device » page 14, Bluetooth
function on the telephone.
» page
®
» page 31, Bluetooth - connection
®
signal range.
» page
» Fig. 16 on page 27 an imme-
C
®
32, Delete
32
33
34
35
36
4.
