Hotpoint EG902GX S Operating Instructions Manual page 6

! The hob burners do not require primary air adjustment.
GB
! After adjusting the appliance so it may be used with a different type of gas,
replace the old rating label with a new one which corresponds to the new
type of gas (these labels are available from Authorised Technical Assistance
Centres).
! Should the gas pressure used be different (or vary slightly) from the
recommended pressure, a suitable pressure regulator must be fitted to the
inlet hose in accordance with current national regulations relating to "regulators
for channelled gas".
Safety Chain
! In order to prevent the appliance from overturning accidentally, for
example in case of a child climbing onto the oven door, the safety
chains MUST be installed!
The cooker is provided with safety chains that must be fixed with a screw (not
supplied as accessory) on the wall behind the appliance, at the same height
as the fixing point on the appliance.
Make sure that the chains are fixed in the back of the cooker, as shown in the
drawing, in such way to be tight and parallel to the floor.
! When the installation process is complete, the chains must be kept in tension!
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6