Troubleshooting - Hotpoint EG902GX S Operating Instructions Manual

4. Release the button and the display will show the current time within 4
seconds:
When "auto" is lighted, it indicates that the length and end cooking time
have been preset to operate in automatic mode. At this point, the oven will
turn on automatically at 12:30 in order to finish the cooking session within
30 minutes. When the oven is on, the
on the display for the entire length of the cooking process. The
can be pressed at any time to display the setting for the length of the cooking
time, while the button can be pressed to display the end cooking time.
At the end of the cooking time, an acoustic signal will sound. Press any
button it turn it off (except the
Immediate Start Time with Preset Cooking Length
When only the length of the cooking time is set (points 1 and 2 of the paragraph
entitled, "Delayed Start Time with Preset Cooking Length"), the cooking
session starts immediately.
Cancelling a Preset Cooking Time
Press the button, and use the
Then press the manual cooking mode button
Timer Feature
The timer can be used to count down from a given length of time. This feature
does not control when the oven comes on or turns off, but, rather, it only emits
an acoustic signal when the preset time has run out.
Press the button, and the display will read:
Then use the and buttons to set the desired time.
Release the button, and the timer will start at that second. The display will
show the current time.
At the end of the preset time, an acoustic signal will sound, which can be
turned off by pressing any button (except the
symbol will turn off.
Changing and Cancelling Settings
• The settings can be changed at any time by pressing the corresponding
button and using the or
• When the length setting for the cooking time is cancelled, the end cooking
time setting is also cancelled, and vice versa.
• When in automatic cooking mode, the appliance will not accept end cooking
times prior to the start cooking time proposed by the appliance itself.
Buzzer volume control
Once you have made and confirmed the clock settings, use button to adjust
the volume of the alarm buzzer.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
symbol (cooking pot) will appear
and buttons).
button to set the time to:
.
and buttons), and the
button.

Troubleshooting

It may occur that the appliance does not function or does not function properly.
Before calling customer services for assistance, let's see what can be done.
First of all, check to see that there are no interruptions in the gas and electrical
supplies, and, in particular, that the gas valves for the mains are open.
The burner does not light or the flame is not uniform around the
burner.
Check to make sure that:
• The gas holes on the burner are not clogged;
• All the removable parts that make up the burner are mounted correctly;
button
• There are no draughts around the cooking surface.
The flame does not stay on
Check to make sure that:
• You press the knob all the way in;
• You keep the knob pressed in long enough to activate the safety device.
• The gas holes are not clogged in the area corresponding to the safety
device.
The burner does not remain on when set to "Low".
Check to make sure that:
• The gas holes are not clogged.
• There are no draughts near the cooking surface.
• The minimum has been adjusted correctly (see the section entitled,
"Adjusting the low flame").
The cookware is not stable.
Check to make sure that:
• The bottom of the cookware is perfectly flat.
• The cookware is centered correctly on the burner.
If your oven releases alot of smoke during cooking.
Check to make sure that:
• You have selected the correct cooking mode for the type of food and the
dish is in the correct recommended shelf position.
• The temperature is correct for the type of cooking required.
• The oven interior is clean. Food residue encrusted onto the enamel coating
inside the oven becomes charred and creates both smoke and odours.
• Dish is placed onto baking tray, splashes of grease or overflows onto very
hot surfaces create smoke.
If, despite all of these checks, the cooker does not function properly and
problem persists, call Hotpoint "After Sales Service" (see back page).
IMPORTANT:
Never call upon technicians not authorized by the manufacturer, and refuse
to accept spare parts that are not original.
GB
11