Table of Contents
Advertisement
WWW.FOSCAM.COM
3.13 PTZ Settings
You can set pan/tilt speed. Normally, PT speed is 3; The larger the setting number, the lower
speed. Don't enable the checkbox "disable preset" if you want to use the function of preset, it will
be effective after you reboot device
Patrol rounds horizontal: Set the round between 1 and 10, then click Submit. Back to "For
Operator". Click the Horizon patrol button, the camera will patrol the rounds horizontally you set
and then stop if you don't click Stop horizon patrol button. For example, you set 5 for the patrol
rounds. Click submit and back to For Operator. Click the Horizon patrol button and do not click
the Stop horizon patrol button, the camera will patrol 5 rounds and then stop automatically.
Patrol rounds vertical: Set the round between 1 and 10, then click submit. Back to "For
Operator". Click the Vertical patrol button, the camera will patrol the rounds vertically you set and
then stop if you don't click Stop vertical patrol button.
Note: Patrol rounds horizontal/vertical has no relation with the rotation rounds that camera
reboots.
3.14 Upgrade Device Firmware
When you upgrade the camera, please upgrade system firmware first and then upgrade the Web
UI.
Click Browse, choose the correct bin file and then click Submit to upgrade.
Don't shut down the power during upgrade until the IP camera tool finds the camera again.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Figure 3.34
Figure 3.35
FI8918E User Manual
38
Advertisement
Table of Contents
