Power Consumption - DCS 900E User Manual

dCS 900E / 902E User Manual
dCS Ltd

Power Consumption

Manual part no: DOC0029021E1
Contact on + 44 1799 531 999
dCS
(inside the UK replace + 44 with 0)
The dCS 900 & 902 have a linear power supply, and so power consumption
changes as the mains voltage changes. The internal regulation is comparatively
efficient for a linear supply, so these changes are kept to a minimum.
Consumption is independent of mains voltage selector switch setting.
Power Consumption with Mains Voltage (measured as AC power into mains
socket):
Nominal mains
Mains -10%
Mains +10%
The actual intended supply voltage is shown on the rear panel. 50Hz or 60Hz
operation is not important – the unit can use either. In general, users will not
need to change the mains input configuration. If you do need this to be done,
please see the section
manual and contact your distributor or dCS.
Manual for Software Versions 1.3x to 1.5x
25 W
22 W
27 W
"Having Your Options
Page 48
th
12 June 2000
Changed", page 54 in this
Document No: OS-MA-D0002-902.1E1
email to: more@dcsltd.co.uk
web site: www.dcsltd.co.uk