Table of Contents
Advertisement
dCS Rossini Transport User Manual
Software Issue 1.0x
September 2018
Power Button
I
Power
To switch on, ensure the rear panel power switch is set to
and press the
button (I) on the front
panel once. Note that the unit cannot be turned on from the remote control.
Power
To set the unit to sleep mode, press the
button once. The main display will turn off, the LED
beside the button will illuminate and the mechanism will stop, but the unit will remain close to running
temperature. Press again to return to normal operation.
Power
SWITCHING OFF
To switch off, hold down the
button for about 5 seconds until
appears on the
display, then release it.
Power
When the menu is open, press the
button to close the menu.
Page 18
Rossini Transport Manual v1_0x
English version
Advertisement
Table of Contents
