Performing The Output Signal Check - JUKI DP2100 Instruction Manual

21-7 Performing the output signal check

2
1) Display the output signal check screen.
When OUTPUT SIGNAL CHECK button
of the check program screen is pressed, the output
signal check screen is displayed.
1
2) Perform the output signal check.
Output state of the various output signals can be
checked in the output signal check screen.
Output state is displayed as 2 with every output
signal.
Display of ON/OFF state is shown as below.
3
: ON state
: OFF state
Press UP/DOWN buttons
the output signal you desire to check.
162
1
3 to check