KVH Industries TracVision L2 Owner's Manual page 62

A Guide to TracVision L2
+POS: 331.7 33.4 2153
Switch held: wrong satellite--------------SAT SELECT switch pressed
Exclude: No longer search AZ = 331.7, EL =
*** Entering Search Mode 1 *** -----------Searching for a different satellite
Search1 decided to go to: AZ = 335.9, EL =
+POS: 23.5 33.5
+POS: 162.5 33.5 1105
*** Entering Search Mode 2 ***
+POS: 150.5 33.4 1108
+POS: 80.1 33.4
+POS: 180.0 34.0 1092
*** Entering Search Mode 3 ***
+POS: 180.0 34.3
+POS: 66.6 22.0
Satellite Found: AZ = 348.8, EL =
+POS: 327.4 22.0
*** Initializing Finetune ***
+POS: 348.8 22.0 1987
+POS: 348.8 23.8 1965
Signal Peaked: AZ = 348.77, EL =
*** Tracking Satellite ***
+POS: 348.8 23.3 2100
+POS: 348.8 23.3 1840
Saved Sat Pos: AZ = 348.76, EL =
+POS: 348.8 23.3 2190
+POS: 348.8 23.3 2010
"Instant On" Startup Sequence
?PGM
KVH TracVision L2 Rev X - Version X.XX - Serial Number XXXXXXXX
Instant On --------------------------------System skips limit switch test
Limit Switch Status: PASS-----------------PASS is expected
*** Initializing IRD ***
Send APG OSD On
Try MPG IRD Type
Send MPG OSD On
Switch Back to Echostar IRD Type
Send APG OSD On
Try MPG IRD Type
Send MPG OSD On
Switch Back to Echostar IRD Type
IRD STATUS: FAIL
Saved Sat Pos: EL = 22.5
*** Initializing Rate Bias ***
+POS: 360.0
E-4
518
889
873
885
567
23.23, RF = 2004
23.29
None ------------------FAIL is expected with no IRD data connection
33.9 2625
33.4
33.5
22.0, RF = 2149