KVH Industries TracVision L2 Owner's Manual page 20

A Guide to TracVision L2
Forward Shipping Restraint
(Arranged for Shipping)
TracVision L2 Shipping Restraints
(Top View, Installed for Shipping)
Do not discard the shipping
restraints. They should be stowed
for future use in case the antenna
unit needs to be removed and
shipped to another location. Four
1 ⁄ ˝ x 5 ⁄ ˝ hex head screws have been
4 8
provided in the kitpack for shipping
as the bolts used to hold the
shipping restraints during initial
shipping are integral parts of the
mounting plates.
Forward Shipping
Restraint Storage
2-6
11. Cut the tie-wraps holding the antenna unit to the
forward shipping restraint (see Figure 2-6).
Figure 2-6
12. Remove the nuts and washers securing the
shipping restraints to the baseplate. The positions
of all three shipping restraints are pictured in
Figure 2-7.
Figure 2-7
13. For convenient storage, rotate the shipping
restraints
mounting bolts using the nuts and washers
removed in Step 12 (see Figures 2-8 through 2-10).
All nuts and washers removed in Step 12 must
be reinstalled. These nuts and washers secure the
baseplate to the mounting plates.
Figure 2-8
tie-wraps used
to secure LNB arm
Shipping Restraint
Rotating Plate
Shipping Restraint
Rotating Plate
Shipping Restraint
180º and secure them to their original
LNB
Installation Bolts and Washers
Shipping Restraint
Nuts and Washers
Forward Shipping
Restraint for
LNB Bracket
Forward Shipping Restraint