Operation Of The Camera Recorder - Panasonic AJ-RC10G Operation Manual

Basic operations

Operation of the camera recorder

1) Operation of the display interlocking
switch
Select the white balance settings by using the
PRE/A/B button and monitoring the PRE/A/B
display.
The state of the camera recorder filter is
displayed on the ND display.
The gain will change when using the two
buttons of the M.GAIN3 button and M.GAIN4
button and monitoring the GAIN display.
2) Operation of the USER switch
The USER MAIN/USER1 switch functions the
same as the USER switch on the camera
recorder. Functions of the USER switch can
be set and confirmed on the camera menu or
the USER-SW item on the unit menu.
3) Operation of the ABB/AWB/BAR
switch
The ABB button and the AWB button have the
same functions as the switches for the white
balance/black balance of the camera
recorder. The lamps for these buttons will
illuminate when the respective functions are
executed.
The BAR button switches the camera output
to the color bar. The lamp is on when the
camera output outputs the color bar.
E-15
(Continued)
4) Operation of other switches
The A.KNEE ON button and the SHT ON
button will switch ON and OFF every time
these buttons are pressed. The lamps for
these buttons will illuminate when these
buttons are set to ON.