Panasonic AJ-RC10G Operation Manual page 7

Remote control unit to ag-hpx500p/e
Hide thumbs Also See for AJ-RC10G:
Table of Contents

Advertisement

Available languages

Available languages

Parts and functions
Basic camera operations
!1"
!5"
!4"
!2" !3"
!1" USER MAIN button
This button has the same function as the
USER MAIN switch on the camera recorder.
The lamp is on only when the button is
pressed.
<Note>
Select the function to assign to the USER
MAIN button by operating the camera menu
from the camera recorder or the unit.
!2" USER1 button
This button has the same function as the
USER1 switch on the camera recorder. The
lamp is on only when the button is pressed.
<Note>
Select the function to assign to the USER1
button by operating the camera menu from
the camera recorder or the unit.
!3" USER2 button
This button has the same function as the
MODE switch on the camera recorder.
(However, it is impossible to move to PC
mode.)
If this button is pressed when the unit is
connected to the AG-HPX500, the
thumbnail screen will be displayed on the
viewfinder/LCD monitor and the AG-
HPX500 will be in MCR mode.
In this case, the message "THUMBNAIL
OPEN" is displayed on the LCD panel of the
unit, and the lamp for the MENU ON button
will illuminate at the same time.
(Continued)
H
!7" !6" !8"
!4" PRE/A/B button
Operations of this button are the same as
for the WHITE BAL switch on the camera
recorder to select PRE, A or B.
The state will switch to "PRE" # "A" # "B"
# "PRE" step by step every time the button
is pressed.
When the power is turned on, the unit is in
the state it was before turning off the power.
!5" PRE/A/B display
This displays the WHITE BAL selection on
the camera recorder using P/A/b
!6" FILTER ND/CC button
This button is disabled when the unit is
connected to the AG-HPX500.
!7" ND Display
The position of the ND filter is indicated
using 1/2/3/4.
!8" BAR ON/OFF button
This button switches the output from the
camera recorder between the color bar and
the camera signals.
When the output from the camera recorder
is the color bar, the lamp is on; otherwise, it
is off.
When the power is turned on, the unit is in
the state it was before turning off the power.
E-6

Advertisement

Table of Contents
loading

Table of Contents