Panasonic AJ-RC10G Operation Manual page 5

Parts and functions
Camera recorder/Scene file operation
!1" !2" !3" !4"
H
!9"
!1" RECORDER ENABLE button
For switching between the recorder mode
and the scene file mode
When the lamp is on:
Recorder mode
Buttons from !3" to !8" are operated as
control buttons for the recording.
When the lamp is off:
Scene file mode
Buttons from !3" to !8" are operated as the
buttons for reading and storing scene
files. When the power is turned on, the
unit is in this state.
!2" REC.INH/LOAD button
In recorder mode:
When the lamp is on, the REC S/S button !8"
is inhibited.
However, even if the unit is in the recording
inhibition state, operation of the USER
button assigned REC function and operation
of the REC button on the camera recorder
are enabled.
The lamp is off when the power is on.
In scene file mode:
The button is operated as the LOAD switch
of the scene file. Data are retrieved from the
file on the remote controller.
(Continued)
!5" !6" !7" !8"
!3" REW/1 button
In recorder mode:
Tape is rewound in MCR mode. The lamp is
on when the tape is rewound.
In the scene file mode:
1 is selected as the number for the scene
file to be saved or loaded.
!4" FF/2 button
In recorder mode:
Tape is fast-forwarded in MCR mode. The
lamp is on when the tape is fast-forwarded.
In scene file mode:
2 is selected as the number for the scene
file to be saved or loaded.
!5" STOP/3-button
In recorder mode:
Tape is stopped in MCR mode.
In scene file mode:
3 is selected as the number for the scene
file to be saved or loaded.
!6" PLAY/4-button
In recorder mode:
Tape is replayed in MCR mode and the lamp
is on when the tape is replayed. If the button
is pressed again during tape replay, it
changes to replay/pause, and the lamp
flashes.
If the button is pressed one more time, the
unit returns to replaying, and the lamp is on
continuously.
In scene file mode:
4 is selected as the number for the scene
file to be saved or loaded.
E-4