Test Operation - Panasonic CZ-RTC5B Installation Instructions Manual

Test Operation

1
Press and hold the 3 buttons for
4 seconds or more simultaneously.
, , ►
2
Select [Test run].
▲ ▼ →
3
Select [ON].
operation mode. Then, [TEST] turns on.)
▲ ▼ →
Press
4
Perform the test operation.
5
Finish the test operation.
Perform step 1 and 2, and then select [OFF] in step 3. ([TEST] display
disappears.)
 The test operation can be performed in Heat or Cool mode.
 Temperature cannot be changed.
 The test operation mode is automatically turned off in 60 minutes. (To prevent continuous
test operation)
 Outdoor units do not operate for approx. 3 minutes after the power is turned on or
operation is stopped.
Attention
 Do not use this mode for purposes other than the test operation. (To prevent
overload of the units)
 Read the installation instructions supplied with the units.
14
(EN)
(The unit enters the test
.