Menu Item; Menu; Black - Panasonic AJ-RC10G Operation Manual

Menu item

Menu

The menu items on the unit may vary with the
camera recorder connected to the unit.
For the following menu items, the factory settings
for the unit only are set separately from the
camera recorder.
BLACK-VR-CONTROL, BLACK-VR-
MODE, and BLACK-VR-RANGE in

"BLACK"

GAIN-VR-MODE and GAIN-VR-RANGE in
"WHITE"
BUZZER, LCD CONTRAST, and SW
BRIGHT in "SYSTEM"
MODE and SPED in "SHUTTER"
When the column of "Storage" in the menu table
is answered with "Yes", the settings for the
relevant items can be stored on the unit or the
SD memory card as a scene file. For details,
refer to "Operation of the scene file" (page 17)
and "Saving/Loading of scene files onto the SD
memory card" (page 19).
<Note>
When the unit is connected to the AG-HPX500,
setting for the shaded part (indicated by the
) in the menu items are unavailable.
BLACK
Variable
Layer Item
range
1 RPED –128 To set the pedestal for
: Rch
+127
GPED –128 To set the pedestal for
: Gch
+127
BPED –128 To set the pedestal for
: Bch
+127
2 BLACK-VR- FLR To select the items to be
CONTROL PED adjusted using the
BLACK volume
FLR: FLARE
PED: PEDESTAL
(When the unit is
connected to the AG-
HPX500,FLR is
disabled.)
3 BLACK-VR- ABS To select whether the
MODE REL BLACK volume of the
RGB is operated using
the absolute value or
the relative value
ABS: Absolute value
REL: Relative value
4 BLACK-VR- MIN To switch the variable
RANGE NORM range of the BLACK
MAX volume of RGB
MIN:
NORM: n50
MAX:
<Note>
When the BLACK lamp is illuminated after pressing the
BLACK/SHAD button, the pedestal for the respective
channels can be adjusted by turning the rotary encoder.
is the factory setting mode.
Contents description Storage
Yes
Yes
Yes
Yes
Yes
Yes
n25
n100
E-22