ioLogik W5300
Main Window
The main window allows users to view I/O status, ioLogik system information, and check messages from the
message monitor without requiring logging in to the ioLogik. However, you will need to log in to perform
configuration and operation tasks.
I/O Configuration Panel (General)
The I/O Configuration panel shows the status of every I/O channel. This is the default panel when you first
open ioAdmin. Input channels are listed on the left and output channels are listed on the right. For more
information about configuring I/O, see the section
Server Info Panel
Information such as the device name, configured IP address, and firmware version, is displayed on the Server
Info panel. This panel allows you to look up the Cellular IP address whenever you need it.
I/O Configuration
Panel, below.
3-9
Utility: ioAdmin