Ø Troubleshooting - Compex PS2208A Quick Install Manual

2. Drill pilot holes at the two marked locations.
3. Fix two 5/16-inch diameters flat-head mounting screws into the wall, with the
heads of the screws protruded 1/8 inch out from the wall.
4. Carefully set the hub over the screws in the wall; then slide the hub down onto the
screws, pressing it slight to the wall.
5. Connect the power adapter to the hub. The POWER LED and PORT LED for
each connected port should light up.
6. The hub is ready to operate.
Ø Troubleshooting
LED Indicators: The Compex Pocket Switch PS2208A is designed with LED
indicators to indicate the operating status such as: Power ON/OFF, Activity/Link
Status and 10/100Mbps connection status. The LEDs function as useful
troubleshooting aids and are found on the front panel of the PS2208A.
LED indicator
Power
Port
English Compex 8 Port Dual Speed Fast Ethernet
Description of Function
Green LED.
If Power LED does not come ON, check that:
♦
Power adapter unit and cord are properly inserted into
the socket and hub.
Red LED for 10M connection;
Green LED for 100M connection:
When LED does not turn ON, check that:
♦
Wire pair connections at RJ-45 plug are correct.
♦
RJ-45 plug is fully inserted until you hear a click
sound.
♦
The PC is powered-up.
Switch (PS2208A)
4