CMO Operations & Logistics
Training & Vendor Development
Multimedia Creation & Support
9.
UPPER BLOCK ASSEMBLY
1. Insert the EARPIECE GASKET, noting that there is only one
correct position.
3. Place the CAMERA ASSEMBLY in its guides in the B-COVER,
taking care not to damage the adjacent flex connector.
5. Place the NAPA DISPLAY MAIN in the B-Cover guides.
Service Manual 6131NFC RM-216
Page
15
(40)
CONFIDENTIAL
2. Fit the EARPIECE evenly into the Gasket.
4. Remove the protective film.
6. Be sure to lock all four clips of the display.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
12.Sept.2007