Upper Block Assembly - Nokia N95 Service Manual

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
9.

UPPER BLOCK ASSEMBLY

1. Assembly
3. Flip over the keypad.
5. Open the connector if necessary while inserting.
Service Manual N95 RM-159/-245/-160/RM320/-321
Page 15 (53)
CONFIDENTIAL
2. Fit a new gasket and place the EARPIECE into the FRONT COVER.
4. Insert the flex foil of the display into the connector evenly.
6. Carefully close the connector. Again, when destroying this
connector or parts of it, the whole SLIDE MODULE must be
replaced.
Copyright © 2007 NOKIA Corporation. All rights reserved.
Approved 6.0
MGR
12.Sept.2007