Nokia 6131 NFC RM-216 Service Manual page 24

CMO Operations & Logistics
Training & Vendor Development
Multimedia Creation & Support
13. Slot the flex connector through the D-COVER with caution. 14. Be sure not to squash the FLEX FOIL when assembling the
15. Only one position is possible for the HINGE CAP RIGHT
assembly.
17. Position the C-COVER SERVICE ASSY in 90 degrees angle to
the Upper BLOCK.
Service Manual 6131NFC RM-216
Page 24 (40)
CONFIDENTIAL
HINGE.
16. Squeeze together the HINGE CAP RIGHT and the new C-COVER.
Ensure both hinges are pressed into C-COVER correctly.
18. Move the flex connector over the connector on the ENGINE
MODULE.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
12.Sept.2007