CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
9.
UPPER BLOCK ASSEMBLY
1. Insert the EARPIECE GASKET properly.
3. Position the Camera Assembly into the guides of the B-
COVER. Take care not to damage the board to board or camera
flex foil.
5. Be sure to lock all the four clips of the DISPLAY. Ensure that
display connector is placed properly in the correct position of
the B-COVER.
Service Manual 63/633 RM-5 - - 626/H/633/b/h RM-26
Page
5
(29)
CONFIDENTIAL
2. Ensure that the dust net is glued on the Earpiece, then place
the EARPIECE evenly into the Gasket.
4. Put the NAPA DISPLAY Main into the B-COVER guides.
6. Place the PCD PWB and pay attention to the flex connectors.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved .0
MGR
6.Apr.2006