Adjust View Angle (Pos 50 Series Only); Turn On The Device - EBN Technology POS50A-5B-LX800 User Manual

5. Align two screws of the MSR assembly to the holes and tighten two screws of
the MSR assembly as shown below.
6. Reinstall right hinge cover, left hinge cover, support cover and base unit.

3.3. Adjust View Angle (POS 50 series only)

Adjust the device to the proper view angle.

3.4. Turn on the Device

1. Make sure all peripherals are connected properly.
2. Press and hold the power switch until the power indicator on the front panel
glow green.
6
Chapter 3