Equinox SF-80/300 Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids. SAFETY INSTRUCTIONS Every person involved with the installation, operation & maintenance of this...
Equinox SF-80/300 Safety IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • Never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections with particular caution! •...
Page 4
Remote control mode: To control the SF-80 or SF-300 strobe in remote control mode, fi rst plug CF-01 CX remote controller into an appropriate mains power supply. Then plug one end of the 1/4” mono jack cable (signal) into the “IN- PUT”...
Page 5
Equinox SF-80/300 Specifications SF-80 Specifications: Lamp ST-80 Flash Rate 1-18fps Signal Connector 6.35mm mono jack Control mode SF-01 CX remote Fuse T1A/250V Power Consumption Power Supply 240V Dimensions 238 x 140 x 220mm Weight 1.4Kgs SF-300 Specifications: Lamp ST-300 Flash Rate...