Update Firmware; Restore Default; Reboot System - KTI Networks KSD-800M Series Installation Manual

5.4.7 Update Firmware

This menu is used to perform firmware (switch software) upgrade via TFTP protocol. Before doing
TFTP operation, one TFTP server must be available in the network to where this switch is connected
and the new firmware file
Settings
TFTP Server IP Address
Firmware File Name
Apply

5.4.8 Restore Default

This menu is used to restore all settings of the switch with factory default values. Note that this menu
might change the current IP address of the switch and make your current http connection lost.

5.4.9 Reboot System

This menu is used to reboot the switch unit with current configuration remotely. Starting this menu will
make your current http connection lost. You must rebuild the connection to perform any management
operation to the unit.
is placed in the server.
image.bin
Description
Specify the IP address of the TFTP server
Specify the file name of the new firmware
Button to confirm the settings
-62-