Administrator -> Qos Settings - KTI Networks KSD-800M Series Installation Manual

Null VID
4.5.2 Administrator -> QoS Settings
Select [4] Administrator -> [2] QoS Settings to configure QoS function related settings for the
switch.
QoS Settings Menu:
[0] Print this menu
[1] QoS Per Port Settings
[2] QoS Other Settings
[Q] Back Administrator
Please Select(0-3)
Select [1] QoS Per Port Settings to configure port related QoS settings:
QoS Per Port Settings:
Port Port based 802.1p
No. priority
+-----+----------+--------------+--------------+
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
+-----+----------+--------------+--------------+
Enter Esc to abort..
Please Input Ports (1~8):
Per Port Settings
Ports
Port based priority
802.1p classification
The null VID of a Null VID packet will be replaced with the associated
ingress port's PVID. This setting still works even Egress Tag rule :
[PVID insertion for untagged packets only] is selected.
Enable - Null VID is replaced with Port's PVID for Null VID packets
Disable - Null VID replacement rule is not applied.
Default TOS/DS
classification classification
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Description
Input port list for configuration.
Enable - All packets received on the port are classified as high
priority
Disable - Port-based classification is not applied.
Enable - Tagged packets received on the port are classified by
comparing the packet's User Priority value and 802.1p High
Priority Tag Setting.
Disable - 802.1p classification is not applied.
-41-