KTI Networks KSD-800M Series Installation Manual page 54

Global Settings
VLAN
VLAN Select
Ingress Rules
802.1Q tag aware VLAN
Ingress member filtering Mode Enable - Drop packet if the ingress port is not the member port of
VLAN Group Configuration
Description
Enable VLAN - Enable switch VLAN function
Disable VLAN - disable switch VLAN function
Enable - Under this mode, the switch will check the content of
every received packets. For 802.1Q tagged packets, the tagged
VID on the packet is used to look up the VLAN group table and
find the group whose VID matches the packet's tagged VID.
Disable - Under this mode, the switch does not check the contents
of the received packets. The default VLAN group indexed by the
ingress port is used directly for further VLAN operation.
the found VLAN group
Disable - ingress member filtering rule is not applied
-54-