Restore Default Values; Security Manager - KTI Networks KSD-800M Series Installation Manual

4.6 Restore Default Values

Select [6] Restore Default Values to restore all settings of the switch back to factory default values.
Do you want to restore system default settings?(Y/N):
Refer to Appendix for factory default values.

4.7 Security Manager

Select [7] Security Manager to change user name and password. The user name and password are
used for access authentication to the switch in telnet management and web management.
Current username: admin
Current password: ********
Press ESC to abort ...
Change username[admin]:admin
Enter password(1-8):***
Confirm password:***
Password updating ........
Password updated.
User is requested to enter new password again for confirmation. A new password is accepted only
two passwords are identical.
It is suggested to change the factory default user name and password before installing the switch into
your network.
-44-