Port Config - KTI Networks KSD-800M Series Installation Manual

4.4 Port Config

Select [3] Port Config to configure port configuration.
Port Config Menu:
[0] Print this menu
[1] Port Status
[2] Port Config
[Q] Back Menu
Please Select(0-3)
Select [1] Port Status to view current port status for all ports as example below:
INET> Port Status:
Port Port Link
+-----+----+------+--------+------+------+--------+--------+-------+-------+
1 TP Down --
2 TP Down --
3 TP Down --
4 TP Down --
5 TP Down --
6 TP Up Enable
7 TP Down --
8 TP Down --
+-----+----+------+--------+------+------+--------+--------+-------+-------+
INET>
Status
Port
Port Type
Link Status
Auto Negotia.
Speed Status
Duplex Status
Port Control
Auto-No Control
Auto Speed Duplex Port
-- --
-- --
-- --
-- --
-- --
100 M Full
-- --
-- --
Description
The port number
TP - 10/100TX port (for Port 7 and Port 8 10/100TX is selected)
FX - 100FX is selected (for Port 7 and Port 8 only)
Port link status
Down - port link down (no status is displayed.)
Up - port link up
Auto-negotiation configuration
Enable - auto-negotiation is enabled
Disable - auto-negotiation is disabled (forced mode is used)
Port speed status
100M - 100Mbps is used
10M - 10Mbps is used
Port duplex status
Full - full duplex is used
Half - half duplex is used
Port function configuration
Enable - Port function (Tx/Rx) is enabled
Disable - Port function (Tx/Rx) is disabled
Port auto-negotiation function
Enable - enable port auto-negotiation
Disable - disable port auto-negotiation (use forced mode)
Auto_No
Enable Enable
Enable Enable
Enable Enable
Enable Enable
Enable Enable
Enable Enable
Enable Enable
Enable Enable
-36-
Speed Duplex
100 M Full
100 M Full
100 M Full
100 M Full
100 M Full
100 M Full
100 M Full
100 M Full