KTI Networks KSD-800M Series Installation Manual page 43

Industrial managed 8-port fast ethernet switches with fiber connectivity
Table of Contents

Advertisement

Select [2] - [5] to configure other settings as follows:
QoS Other Settings
802.1p priority tag
Egress service policy
Specific DS(A) Setting
Specific DS(A) Value
Specific DS(B) Setting
Specific DS(B) Value
Specific IP(A) Setting
Specific IP(A) Value
Specific IP(A) Mask Value
Specific IP(B) Setting
Specific IP(B) Value
Specific IP(B) Mask Value
Description
802.1p High Priority Tag Threshold Setting for 802.1p classification
Valid values : 0 - 7
Weighted Round Robin ratio:
(1) 4:1 - 4 high priority packets then 1 low priority packet
(2) 8:1 - 8 high priority packets then 1 low priority packet
(3) 16 :1 - 16 high priority packets then 1 low priority packet
(4) Always high first - Packets in high priority queue are sent first
until the queue is empty
Enable - Enable user defined DSCP(A) checking
Disable - User defined DSCP(A) classification is not applied.
Enter user defined DSCP(A) value for classification.
Enable - Enable user defined DSCP(B) checking
Disable - User defined DSCP(B) classification is not applied.
Enter user defined DSCP(B) value for classification.
If a received IP packet's source address or destination address
belongs to the user defined IP network addresses. The packet is
classified as high priority.
Enable - Enable user defined IP(A) network address checking
Disable - IP(A) classification is not applied.
Set user defined IP(A) address for classification.
Set user defined IP(A) subnet mask for classification.
IP(A) address and IP(A) subnet mask specify IP(A) user defined
IP network address for IP packet classification.
If a received IP packet's source address or destination address
belongs to the user defined IP network addresses. The packet is
classified as high priority.
Enable - Enable user defined IP(B) network address checking
Disable - IP(B) classification is not applied.
Set user defined IP(B) address for classification.
Set user defined IP(B) subnet mask for classification.
IP(B) address and IP(B) subnet mask specify IP(B) user defined
IP network address for IP packet classification.
-43-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ksd-800m-1 seriesKsd-800m-2 series

Table of Contents