Advertisement
before wiring.
* If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones initially supplied with
the hood.
* The earthing of this hood is compulsory. Do not remove ground prong of the plug.
TELESCOPIC CHIMNEY COMPRISING ASSEMBLY
Decorative Chimney Top
Raise the decorative chimney top 2.1 up inside the decorative
chimney bottom 2.2. Secure decorative chimney top 2.1 to the
chimney mounting bracket 5.1 that is well fixed on the wall with the
two chimney bracket screws 7.b supplied from two sides.
Decorative Chimney Bottom
1.
Carefully slide the decorative chimney bottom 2.2 down outside the decorative
chimney top 2.1. Carefully place the decorative
chimney bottom 2.2 into the recessed area of the hood
body top.
2.
Fix the Decorative Chimney Bottom 2.2 with the three
decorative Chimney Bottom screws 7.c supplied from
inside of hood body.
OPERATION OF CONTROLS
The hood is operated using the push button on the front
panel.
The light switch turns the lamps on and off.
The blower switch turns the blower on to three speed settings:
0 - OFF
1 - LOW SPEED
2 - MEDIUM SPEED
3 - HIGH SPEED
4 – LIGHT
8
Advertisement
