Assign Pc Names - Ericsson HM410dp User Manual

Advanced Setup
Application
FTP
Telnet
Secure shell (SSH)
Windows Media Services
Gnutella
Kazaa
Windows Terminal Server
DNS
PPTP
IKE ("Internet Key Exchange")
LDAP
GRE
Databeam (T.120)
You can allow access to a common application from a specific PC on your
network by enabling it. For more information, see section 5.4.5 - "Configure
Internet Applications".
If you want to allow access to an application that is not included in the
above list of common applications, you can create and enable a custom
application. For more information, see section 5.4.6 - "Configure Custom
Applications".
Before you can configure your default NAT settings, you must assign a
unique name to each of the PCs on your network. See below.
5.4.4

Assign PC Names

You must assign a name to each of the PCs on your network before you
can enable access to common applications or create custom ones. This
allows you to refer to PCs by name instead of IP address.
1
2
42
From the left-hand Advanced Setup menu, click on Security.
Click on the Configure named PCs link (in the Virtual Server section)
to display the following page:
TCP port UDP port
number number
21 N/A
23 N/A
22 N/A
1755 1755
6346 N/A
1214 N/A
3389 N/A
N/A 53
1723 1723
N/A 500
389 N/A
N/A (GRE) N/A (GRE)
1503 N/A
1553-ZAT 759 94 Uen B – July 2005
Trigger
required?
False
False
False
False
False
False
False
False
False
False
False
False
false