Table of Contents
Advertisement
Advanced Setup
5.4.1
Enable/Disable the Firewall
The Firewall is by default disabled meaning that the configuration is set to
allow all PCs on your network to contact all Internet web sites. You can
configure the HM410dp to block access to certain Internet Websites from
some or all the PCs on your network.
From the Advanced Setup menu, click on Security. The "Security State"
part displays information about the security settings.
To change the state of the Firewall select Enabled and click the
Change State
Note:
A new part named "Firewall Configuration" is now displayed on the Security
page.
38
button.
To save the Firewall state permanently, you MUST perform a Save
Config. From the left hand menu, select Advanced Setup > Save
Config and then click the
button.
Save
1553-ZAT 759 94 Uen B – July 2005
Advertisement
Table of Contents
