Advanced Setup
5.2
Default Settings
In addition to handling the DSL connection to your ISP, the HM410dp can
provide a variety of services to your network. The device is preconfigured
with default settings for use with a typical home or small office network.
The table below lists some of the most important default settings; these and
other features are described fully in the subsequent chapters. If you are
familiar with network configuration, review these settings to verify that they
meet the needs of your network. Follow the instructions to change them if
necessary. If you are unfamiliar with these settings, try using the device
without modification, or contact your ISP for assistance.
Note:
Table 3
Parameter
LAN IP Address / Subnet Mask
DHCP Server
DNS Server
Default Gateway
NAT
5.3
Password
The Advanced Setup > Password page lets you restrict access to your
device's web pages using password protection. With password protection
enabled, users must enter a username and password before gaining
access to the web pages.
Note:
1553-ZAT 759 94 Uen B – July 2005
Before you modify any settings, we strongly recommend that you
contact your ISP prior to changing the default configuration.
Default Configuration Settings of the HM410dp
Enabling password protection does not affect access to the
Internet, only to the HM410dp web pages.
Value
192.168.1.1 / 255.255.255.0
Enabled with the following pool of
IP addresses:
192.168.1.2 through 192.168.1.21
192.168.1.1
192.168.1.1
Enabled
33