Sony SAL1680Z Service Manual page 32

HELP22
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-15):
Grease (G-115):
Grease (G-117):
1. Apply the anti-diffusion agent (A-20), grease (G-15) and following grease (G-A) to the indicated locations of focus operation ring
block.
Grease (G-A) = (G-115 : G-117 = 1 : 2)(Mix grease at the following rates before using the grease, and mix grease enough.)
2. Apply the grease (G-15) to the indicated portions of A.B block.
3. Inserting the lever of focus operation ring in the cut portion of inner side of outer barrel assembly, install the focus operation ring.
4. Engage the gear A.B block with gear of focus operation ring and tighten two screws to fix the gear A.B block.
Gear A.B Block
Focus Operation Ring
Outer Barrel Assy
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
J-6082-619-A
J-6082-627-A
J-6082-660-A
Screw
Apply the grease
(G-15) (Gear)
Apply the grease
(G-15) (Shaft)
Apply the grease (G-A) (Overall)
Apply the grease
(G-15)
Apply the grease (G-15) (Gear)
DT 16-80mm F3.5-4.5 ZA)
*
Apply the anti-diffusion
agent (A-20)
(All circumference)
HELP