Sony SAL1680Z Service Manual page 22

HELP08
Adhesive bond (B-10): J-6082-612A
1. Install the rotation cover pin in the groove as shown in the figure.
2. Apply the adhesive bond (B-10).
Outer Cover Block
Outer Barrel Assy
HELP09
1. Clean the inner and outer sides of focus scale window of outer cover block.
2. Place the focus scale window of outer cover block to the index side, insert three projections at inner side to the rib-less portion of
outer barrel assembly aligning them, and rotate it in the arrow direction until it clicks.
3. Confirm that no scar is found on the focus scale window and no grease is attached.
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
Rotation Cover Pin
Apply the adhesive bond (B-10)
Index
Projection
Focus Scale Window
Outer Cover Block
DT 16-80mm F3.5-4.5 ZA)
*
HELP