Pressing The Setup Key; Analog Input Setup; Adjustable Parameters; Input Compressor Linking - Zaxcom MAXX User Manual

Mixer/recorder/transmitter
Hide thumbs Also See for MAXX:
Table of Contents

Advertisement

MAXX OPERATIONS

Pressing the Setup key

Analog Input Setup

Pressing the Setup key will take you to the analog Setup menu where you can adjust the parameters of the 4 analog
inputs.
Input Compressor with
available Stereo Linking
(See below – for linking)
Adjustable High
Pass filter
Shows the Input level of
the Channel you are
adjusting
While in the setup menu, pressing the TC, BUS, SETUP, TONE keys will jump to the Setup page of the
corresponding input channel.

Adjustable Parameters

• Input Trim
• Input Type – Mic Level or Line Level
• Input Compressor
• 48 Volt Phantom Power – On or Off
• Input Delay – Variable from .0ms to 100ms in .01 ms increments
• High Pass Filter – Turning on the HPF turns on a fixed frequency hardware cut. Adjusting the frequency adjusts a
software filter that is adjustable between 40Hz to 230Hz
• Two Variable Notch Filters
• Phase Invert

Input Compressor Linking

When using a stereo or surround microphone the input compressors (limiters) should be LINKED to insure that the
spatial integrity of the signal is maintained.
Your choices are: OFF, ON, GroupA, GroupB and GroupC. This allows you to have up to three different groupings.
For example, a stereo microphone on inputs 1 and 2 would have their limiters set to Group A. If the signal on input 1
needs limiting, the limiters on both 1 and 2 will activate together rather than just the limiter on channel 1.

Digital Input Setup

When in the Setup menu if you press the PFL key for the corresponding AES input number will take you to the digital
setup menu for each of the digital inputs.
So pressing PFL for fader 1 will take you to the input setup menu for AES 1, pressing PFL for fader 2 will take you to the
setup menu for AES 2, fader 3 for AES2 and 4 for AES 4.
The AES setup menu has the same parameters the analog setup menu has with the exception of the input type option.
Scroll for additional menu items
Turns on the input compressor and sets link group
48
Input Setup
Two
Adjustable
Notch Filters

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAXX and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents