Canon PIXMA MX310 Service Manual page 8

##750 TX
##752 TX
##753 TX
##754 TX
##755 TX
##757 TX
##758 TX
##759 TX
##760 TX
##762 TX
##763 TX
##764 TX
##765 TX
##767 TX
##768 TX
the control channel or further, causing T1 time-over
After transmitting PPS-NULL in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting PPS-NULL in ECM transmission, DCN has been
received.
After transmitting PPS-NULL in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
After transmitting PPS-NULL in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed.
After transmitting PPS-MPS in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting PPS-MPS in ECM transmission, DCN has been
received.
After transmitting PPS-MPS in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
After transmitting PPS-MPS in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed.
After transmitting PPS-EOM in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting PPS-EOM in ECM transmission, DCN has been
received.
After transmitting PPS-EOM in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
After transmitting PPS-EOM in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed.
After transmitting PPS-EOP in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting PPS-EOP in ECM transmission, DCN has been
received.
After transmitting PPS-EOP in ECM transmission, re-transmission of
(8/32)