Table of Contents
Advertisement
■ Install the car kit in a vehicle
Remote control CU-13R
The remote control should be located so that it is within easy reach of
the user. Do not mount the remote control within the head impact area.
Mount on the dashboard or console
You can mount the remote control on the dashboard or console using
the supplied tape. Do not cover the battery cover of the remote control.
Mount to the steering wheel using the supplied strap
Install the remote control to the inside of the steering wheel. Do not
install the remote control to the centre or outside of the steering wheel.
1. Wrap the strap around the steering wheel (not shown in the figures).
2. To open the catch indicated with an arrow, pull the catch (1), and
thread the strap through the opening (2).
3. Pull the strap from the end to keep it securely in place (3).
4. Press the end of the strap downwards (4), and press the catch
upwards (5).
5. Press the catch against the steering wheel until it locks into place
(6).
I n s t a l l a t i o n
13
Advertisement
Table of Contents
