Installing Internal Options - Fujitsu Primergy BX600 Start Manual

4

Installing internal options

If internal options have been purchased separately, install them before installing the operating system.
In the following case, do not install internal options now.
- Custom Made Service
When installing internal options, perform operations after
reading the following manuals.
"BX600 S3 Blade Server System Unit
��������������
Hardware Guide Chapter 4 Installing
Options"
������������ "Chapter 7 Installing Internal Options"
"PRIMERGY Server Books" / "Supplement"
���������������
n Available internal options and installation locations
����������������������
-
After installing internal options, check that the order and place of installation are correct and that the connectors and cables
are correctly attached.
- For details about server blade internal options, refer to the "User's Guide".
������������
- Install the non-system hard disk unit after the OS has
been installed. Installing the OS after the hard disk unit
has been installed may end in an error.
-
When installing a server blade with an installed Fibre
Channel Expansion Board in the chassis, install an
SFP module in the Fibre Channel connector of the cor-
responding FC Pass-Thru Blade or in the Fibre Channel
Pass Thru Blade SFP module slot.
��������������
��������������������
���������������������
��������������
��������������������
3
������������
����