Chapter 3: Remote Control Direct Access - ViewSonic Precision User Manual

Chapter 3: Remote Control direct access

Power
Power button to turn on or off the projector.
Power ON
Power OFF
Cancel Power
OFF

www.azulmarina.com
Press on the remote control/top panel to turn
on projector.
Press on the remote control/top panel, it would
pop up a confirmation screen showing:
"Press Power Button Again to power off."
Once this confirmation pops up, Press on the
remote control/top panel again to turn the power off.
After lamp cooling cycle is completed, the unit will
enter Stand-By mode.
Press on the remote control to cancel the
power off process, once this confirmation pops up.
Light
To illuminate remote control key pad backlight.
Light ON, no
action
Light ON, action
www.azulmarina.com
Press on the remote control to illuminate the
remote control keypad backlight. Backlight will
automatically switch off after 10 seconds, if no
other key is pressed.
Press any remote control key will illuminate the
keypad backlight and calls up the function at the
same time.
Backlight will automatically switch off after 10
seconds, if no other key is pressed.
ventas@azulmarina.com