Adjusting The Projected Image - ViewSonic Precision User Manual

Adjusting the Projected Image

Adjusting the Projector Height
The projector is equipped with two elevation feet to adjust the image height.
To raise the image:
1. Press the elevation button.
2. Raise the image to the desired height angle, then release the button to lock the elevation foot
into position.
To lower the image:
1. Press the elevation button.
2. Lower the image, then release the button to lock the elevation feet into position.
« »
NOTE
• To avoid damaging the projector, make sure that the elevation feet are fully retracted before
placing the projector in its package.
0
www.azulmarina.com
Adjusting the Projector Lens Position
1. Press the Lens Shift button.
2. Use four directional buttons to adjust the lens position.
The adjustable projection range
www.azulmarina.com
ventas@azulmarina.com